100A Standard SPLIT-CORE CURRENT SENSOR
100A Standard SPLIT-CORE CURRENT SENSOR Introduction
SHAANXI FULLSTAR SCT036 Series split-core current transformer AC current from 5 to 600 Amps passing through the center conductor. Split core CTs are designed for fast and easy installation.The split core design permits non-contact current measurements through magnetic field induction without requiring that the primary wire be taken offline and disconnected for CT installation.This method permits a safer,easy and portable current measurement.
Maximum continuous primary current 600A AC
Output: 33.3-100 mA Volt at rated current
Current Ratio: 500:1,1000:1,2000:1,2500:1,3000: 1
Maximum Primary Voltage: 3500-5000Vac(Insulated Conductor)
Phase angle: Less than 0.5 degrees at rated current
Frequency Range: 50 Hz to1K Hz
Accuracy: ± 0.5/1% from 5% to 120% of rated current
Operating Temperature: -25 Cto 60 C.
Insulation Voltage: 720 Vac
Leads: 4Foot(105cm), UL 1015, Twisted Pair, 24AWG
CE ,ETL recognized, and RoHS compliant
Output and leads can be customized
|Part number||Hole diameter||Rated current||Rated output||Accuracy||Resistance||Work frequency|
|SCT 010T||10 mm||80 A||26.6 mA||0.5/1||10 Ω10||50-1K Hz|
|SCT016T||16 mm||120 A||40 mA||0.5/1||10 Ω||50-60 Hz|
|SCT016TS||16mm||150A||50 mA||0.5/1||10 Ω||50-60 Hz|
|SCT024TS||24mm||400A||100 mA||0.5/1||8Ω||50-60 Hz|
|SCT036TS||36mm||600 A||100 mA||0.5/1||5Ω||50-60 Hz|
Shaanxi Fullstar Electronics has a 5000 square kilometer workshop. More than 300 workers work here. They are experienced and trained.
Fullstar has a strictly quality control system. From the material to finished product. We made inductance testing to every cores. Then choose the proper cores to make CTs. Then we made DC, current, hi-pot testing . After getting approved, we inspect the outlooking and parameter checking, wepack the goods.
Sub-Metering Accurate Measurement
Data Loggers to analyze Building & Machinery Performance
Digital Fault Recorders
Smart Grid Application Features
Three Phase Balance Control
In-Factory Display In-Home Display
Inverters for Solar & Wind Turbine Systems
Power Measurement Device For PLC
1.Q:Why choose us?
A:We are professional in making current transformer for more than 24 years
2.Q:Do you have any certificates
A:We have CE,RoHS, CCC, CQC, ISO9001:2015 Certification.
3.Q:How about your products quality inspection?
A:We have professional QA and QC teams,100% quality inspection is performed before goods out of factory.
4.Q:Can you accept to use our logo?
A:we accept OEM and ODM production and can make customized product.
A:we provide repair or replace service within 18 months if energy meter is not working properly.