Ni-Zn Magnetic DR Core For Making Inductor With Dimension 10X11, 10X12,14X15,16X18
Type : Ferrite Ni-Zn core
Description: Nickel zinc ferrite is generally relatively low permeability, thin and small grains, and the porous structure are usually brown, especially in the production process of low temperature sintering is particularly prominent.
Fullstar P/N : DR2W10x11, DR2W10x12, DR2W14x15, DR2W16x18
Testing Frequency : 1KHz, 1V
Test Meter : CH-1061
Properties: high frequency soft magnetic ferrite with spinel structure. Relative initial permeability A15 ~ 70. Coercivity 238.8 ~ 557.2A/m. Curie points 350 ~ 450. Resistivity 5 * 104 / cm. At low frequency, less than the performance of Mn Zn ferrite.
Can be used in the frequency range of 10kHz to 300MHz, can be used in the production of transformers, magnetic head, short wave antenna rod, tuned inductor reactor and magnetic saturation amplifier, etc.. Can also be used in the high frequency and strong magnetic field as the transmitter terminal of the inter stage coupling transformer and the proton synchrotron resonance cavity, such as the acceleration of the magnet.
CONTACT INFO :
Wechat : 55911767
TEL: 86-29-86676405 /
1.35 years of experience
2.Short delivery time, some parts are in stock
5.Samples are free and could be delivered in 4 days
6.Production capacity : 500,000 pcs/month
7.With complete and advanced automatic devices and more than 300 experienced staff
8.Complete certificates: UL insulation system, ISO 9001:2008, TS16949, RoHS